Page 6 of 27
1. Do not connect this griddle to any unregulated sources of propane.
2. Before each use, check the gas hose for excessive abrasion or wear,or cuts. Replace a hose
assembly showing those signs. The replacement hose assembly shall be that specified by the
manufacturer. Inspect the hose assembly underneath the side burner and following the regulator
hose up to its connection to the gas manifold assembly.
3. Always perform the Leak Test listed below before using your griddle for the first time, if the cylinder
has been changed,any gas components have been changed, the regulator flow-limiting device has
been activated, or after a long period of non-use.
4. Do not attempt to connect the griddle to the LP system of a motor home or trailer.
Your regulator is equipped with a Q.C. Type 1 quick connect system. It will not allow gas to flow until a
positive seal has been made.It has has a termal element that will shut off the gas flow if the temperature reaches
240 degree F(115 degrees C). It also has a flow-limiting device that will restrict the flow of gas to 10 cubic
feet per hour(0.28 cubic meters per hour).
Before each use,check the gas hose for excessive abrasion,or wear,or cuts. Replace a hose assembly showing
those signs with the hose assembly specified in the parts list before using the griddle.
