CF-1242 AU Rev-B 3/19/15
The area shown below (denoted by diagonal lines) should be clear of combustible materials.
B.
Dimensional Information
An overhead view of a suggested non-combustible framing for this burner is shown to
assist in locating gas piping and constructing a base for this burner. . Be sure to plan
enough space to install a manual shutoff valve before gas reaches the control valve on
the burner.
Dimensions approximate. Always measure before installing permanent gas lines.
Valve input location is roughly centered in the base.
Cross-sectional view
4”
102mm
4”/102mm
4”
102mm
4”/102mm
Overhead view (Clearance to combustibles below top of burner)
4”/102mm
Suggested minimum interior dimensions
of a non-combustible fire pit
4”/102mm
