5
4. Attach Panel A using Bolt A (4X) to legs as shown below. Attach
bottom of panel first with the help of the side support brackets.
Next attach top of panel to upper support brackets. Repeat
process for opposite side.
3. Attach Corner Support Brackets to all corners of legs as
shown below. Attach 4X brackets to each Leg C, attach 3X
bracket to Legs A and B. Brackets attach using Bolt A (1X).
Tighten bolts to help stabilize side panel when attaching.
First
Second
NOTE: Center support bolt holes
should be at the bottom of each
of Panel A when attaching panels
to table.
Center Support bolt holes
