9
control valve.
TIGHTEN SECURELY WITH A WRENCH
Thermocouple Installation
•
Refer to Crystal Fire Plus instruction manual for detailed attachment of
thermocouple.
•
Attach thermocouple to burner valve as shown below.
Electrode Installation
Plug both BLACK wires hanging from the burner into the back of the
CF-SPARKER. If an orange wire is present, do not use it. The orange
wire is for Direct Spark Ignition system only.
Test system by pushing the button on the igniter. Consult the
troubleshooting section of the Crystal Fire Plus Burner Owner’s
Manual, if the spark is weak, intermittent, or not present.
