outdoorrooms.com
9
C. FINISHING FREE-STANDING INSTALLATIONS
Fireplace is designed to be custom finished. Interior frame studs can be
located by screw location on front and back of fireplace.
Reference the red “X’s” in
Image 4.4
below.
WARNING
If these clearance requirements are not followed exactly, a fire or explosion may
result casuing property damage, personal injury or loss of life.
!
!
Image 4.4
x
x
x
x
ATTENTION
Care must be taken around stainless steel interior parts.
Stainless steel can be easily scratched.
!
!
TOP CAP
MUST
BE
NON-COMBUSTIBLE
Vents must
remain unobstructed
Non-combustible materials
ONLY
in red region
Combustible materials can
be used in blue region with
maximum thickness of
1.50 in. (38.10mm).
NO MANTELS ON FREE-STANDING UNITS.
6”
6”
6”
Vents must
remain unobstructed
