outdoorrooms.com
13
WARNING
FIRE OR EXPLOSION HAZARD
If you do not follow these instructions exactly, a fire or explosion may result
causing property damage, personal injury, or loss of life.
!
!
TO EXTINGUISH
Image 6.1
Image 6.2
Image 6.3
Image 6.4
B. VCSV SYSTEM
Verify control valve is in OFF position.
See Image 6.1.
If operating on a self-contained propane cylinder,
ensure cylinder valve is CLOSED. If operating on a
hard-piped system, ensure main gas supply shut-off
valve and all other valves in gas system are OPEN.
If operating on a self-contained propane
cylinder, slowly open cylinder valve.
Press and hold sparker button. Verify an
audible and visible spark is present within
the ignition wind guard.
See Image 6.2.
Gently press and turn control knob to
LOW/IGNITION position. Fully depress control
knob and hold for 3-5 seconds.
See Image 6.3.
Burner should ignite and continue to operate
when control knob is released.
If burner does not light or remain lit after 20
seconds of attempting ignition, turn control valve
to OFF position and wait 5 minutes to allow gas to
dissipate before attempting ignition again.
DO NOT
ATTEMPT TO LIGHT BURNER IF YOU SMELL GAS.
With burner lit and operating, the flame height can
be adjusted between LOW and HIGH at any time.
See Image 6.4.
Turn control knob to LOW/IGNITION position.
Then gently depress control knob and turn to
OFF position.
See Image 7.1.
If using a self-contained propane cylinder, close valve.
OFF
LOW/
IGNITION
HIGH
PUSH AND HOLD
TO IGNITE
OFF
LOW/
IGNITION
HIGH
PUSH AND HOLD
TO IGNITE
DEPRESS SPARKER
BUTTON
SEE DETAIL B
LOOK FOR SPARK
HERE
OFF
LOW/
IGNITION
HIGH
PRESS AND HOLD
SPARKER BUTTON
ROTATE COUNTER-CLOCKWISE
TO LOW AND SLOWLY DEPRESS
HOLD KNOB IN FOR 3-5 SECONDS
