outdoorrooms.com
7
Remove access door from end of
fireplace.
Using two wrenches, disconnect flex
line and connect regulator hose.
An adaptor can be purchased
erperatly to allow propane regulator
hose to attach to DSI. See reference
materials at end of Crystal Fire® Plus
Manual.
Tilt self-contained propane
cylinder and position within
fireplace in large circular hole in
base pan. As shown in
Image 3.5.
E.
SELF-CONTAINED PROPANE CYLINDER INSTALLATION
HAND TIGHTEN, DO NOT USE A WRENCH FOR THIS CONNECTION.
!
!
ATTENTION
F. FINAL INSTALLATION STEPS
Once gas, electical connections
are made, and a leak test is
performed,replace access panel
on front of fireplace.
Using supplied screws attach
access panel to frame. Reference
red “X’s” in
Image 3.6
for screw
locations.
x
x
x
x
x
x
Image 3.6
Image 3.5
•
•
•
•
•
NOTE:
Self-contained propane cylinders can only
be used with the RLFP-40 and RSTL-40
