www.desatech.com
123224-01A
2
4. Position 3 top support pillars over pillar support connectors.
Secure each set with 1 screw (A) each.
2. Cut wire tie to release grate assembly.
Wire Tie
3. Complete grate assembly by installing 2 screws into grate pillar (A).
Add Screw
5. Locate tabs on grate assembly. Align tabs with slots in burner plate.
Slot
Tab
Burner
Plate
6. Slide grate assembly into slots in burner plate.
ASSEmBLy
Estimated assembly time: 25 minutes
Tools required:
• #2 Phillips screwdriver
• 3/8" Open end wrench or adjustable wrench
Hardware packet provided with heater may contain more parts than
needed for heater assembly.
Hardware packet contains the following items shown on pages 8
through 10 of your owner's manual:
Knob (1), Propane Tank Retention Chain (1), Retention Hook (2),
and AA Battery (1).
Parts are referenced by designated letter throughout assembly
instructions. Hardware packet contains the following (quantity used
in parenthesis):
Description
Part Number
A 3/8" Screw (53)
119620-02
B 10-24 x 1
1
/
4
" Screw (3)
M12345-53
C 10-24 Hex Nut (3)
NTC-3BZ
1. Attach emitter assembly to burner support plate with 2 screws (A).
A
B
C
