21
. Position the Front
Top Plate on top of Door
and Front Wall Panel.
Front Top Plate is straight
cut on the ends and is 70”
long. Once again, the Top
Plate will be flush with
inside of Top Wall Plate.
Attach with 4 - 2” screws
into Top Door and Wall
Plates.
22.
Next, attach the four Side Top Plates (2 per
side). The Side Top Plates are angle cut down the
length. Once again, position Top Plate on Wall
Plate so it is flush with inside of Wall Plate. Side
Plate should also be flush with Rear Wall Plate.
When in correct position, screw down
plate with 4 - 2” screws per piece.
23.
Complete all Side Top
Plate attachments as
described above.
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com sales@outdoorlivingtoday.com
Page 10
CAUTION:
Prior to completing
Step 23,
Side Top Plates will be
protruding out from the playhouse.
Please use caution in the work
area and remove any children who
are at eye level with Top Side
Plates.