Parts Lists:
A. Floor Section
3 - 35” x 75” Floor Joist Frames
3 - 1 1/2” x 3 1/2” x 72” Floor Joists
2 - 35” x 75” Plywood Floor Pieces
13 - 1” x 5 1/2” x 34 1/4” Deck Boards for Porch
3 - 1 1/2” x 3 1/2” x 48” & 57” Floor Runners (3 each size)
1 - 23” long Threshold for Doorway (angle cut on edge)
B. Wall Section
4 - 35” x 60” Solid Wall Panels (Bottom Wall Plates Unattached)
4 - 1 1/2” x 2 1/2” x 35” Bottom Wall Plates
3 - 35” x 60” Window Wall Panels
3 - Window Inserts
1 - 10” x 58 1/2” Narrow Porch Wall Panel
1 - 1 1/2” x 2 1/2” x 58 1/2” Left Side Door Jamb
1 - 1 1/2” x 2 1/2” x 35” Door Header
1 - 23” x 32 1/2” Bottom Door
1 - 23” x 25” Top Door
Gable Wall Panels
1 - Rear Gable Wall (Triangular Shaped with Designer Shingles)
1 - Middle Gable Wall (Triangular Shaped with Regular Siding)
1 - Decorative Front Gable (Designer Shingles)
Top Wall Plates
1 - 3/4” x 2 1/2” Rear Top Plate (Angle cut on end 75”)
1 - 3/4” x 2 1/2” Front Top Plate (Straight cut on end 70” )
4 - 3/4” x 2 1/2” Side Top Plate (Angle cut on length 50 3/4”)
C. Rafter and Roof Section
18 - 1 1/2” x 2 1/2” x 44 7/8” Rafters (angle cut on ends)
2 - 3/4” x 3 1/2” x 44” - Ridge Boards
2 - 3/4” x 3 1/2” x 61” - Ridge Boards
4 - 1/2” x 4 1/2” x 52 1/2” Soffits (Both Sides)
Roof Panels
4 - 41” Outside Roof Panels (Shingles overhanging Roof Battens
on 1 end)
2 - 35” Middle Roof Panels (Shingles flush with Roof Battens)
D. Porch Section
2 - 3 1/2” x 3 1/2” x 58 7/8” Porch Posts (long)
1 - 3 1/2” x 3 1/2” Deck Post (short)
3 - Hand Rail Sections
2 - 3/4” x 3 1/2” x 34 1/2” Top Plate Front Extensions
1 - 1 x 4 1/2” x 58 7/8” Front Wall Trim/Support with 4 1/2” Filler
Strip Attached to back
1 - 1 x 4 1/2” x 58 7/8” Front Wall Trim/Support with 2 1/2” Filler
Strip Attached to back
4 - Corner Brackets
12 - 1/2” x 1 1/2” x 4” Post Base Trims
2 - Sheets (34 1/2” x 37” x 1/8”) for Porch Ceiling
E. Miscellaneous Section
Ridge Caps
1 - Bundle of 20 Cedar Roof Ridge Caps
Bottom Skirting
2 - 1/2” x 4 1/2” x 38” Front Bottom Skirting
8 - 1/2” x 4 1/2” x 34 3/4” Bottom Skirting
Corner & Sidewall Trim
7 - 1/2” x 2 1/2” x 64” Rear / Sidewall Trims
2 - 1/2” x 2 1/2” x 60” Back Wall Filler Trims
2 - 1/2” x 4 1/2” x 67” Back Wall Wide Corner Trims
1 - 1/2” x 2 1/2” x 67” Horizontal Trim above Door & Window
Wall
1 - 1/2” x 2 1/2” x 58” Front Wall Porch Trim
1 - 1/2” x 2 1/2” x 58” Front Door Porch Trim
Facia Trim
2 - 3/4” x 3 1/2” x 46” Rear Facia (Angle cut on ends)
4 - 3/4” x 3 1/2” x 57” Side Facia
2 - Gable Facia Pieces (Double Radius Cut)
Filler Shingles (6” wide)
8 pcs Long Filler Shingles
4 pcs Short Filler Shingles
**Miscellaneous Pieces
2 - Flower Boxes
1 - Pentagon Facia Plate
2 - Facia Detail Plates
1 - Spare Wall Siding
2 -Spare Shingles (Use to shim door, etc)
Hardware Package
2 1/2” Screws
2” Screws
1 1/4” Screws
3/4” Black and Sliver Screws
2 1/4” Decking Nails
1 1/4” Finishing Nails
1 1/4” Shingle Nails
4 - Door Hinges
1 - Thumb Latch Handle for Door (with Hardware Kit)
8 - Simpson Strong Tie Rafter Connectors (Angled)
6 - Simpson Strong Tie Roof/Gable Connectors (90 degree)
2 - 1/16” x 3” x 7” - Metal Ridge Board Connectors
1 - Square Drive Bit for Screw Gun
Tools Required:
Work Gloves and Safety Glasses
Screw Gun
Level
2 Large Ladders
Hammer
Wood Clamps
1/8” Drill Bit for Pilot Holes
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com sales@outdoorlivingtoday.com
Page 2
Thank you for purchasing a 6x9 Sunflower Playhouse.
Please take the time to identify all the parts prior to assembly.
