Tighten
ASSEMBLY INSTRUCTIONS
STEP 6
Unscrew 4pcs M4 x 10 bolts to take off battery compartment cover, place 2pcs 1.5V D size
batteries (not included) into
battery compartment. Then secure the battery compartment cover back to position with 4pcs M4 x 10 bolts.
Note: Please take out batteries from battery compartment during periods of extended inactivity.
Battery compartment cover
Battery compartment
D size batteries 2pcs (not included)
M4 x 10 bolts 4pcs
11
STEP 5
Insert cylinder fixing hook (4) into holes on base assembly (2).
Place the gas cylinder (not included) into the base assembly (2) and fix it with cylinder fixing hook (4).
Attach the regulator to the cylinder and turn clockwise to securely tighten the valve. Close and latch the door.
Note: Make sure to check for leaks after attaching the cylinder. (For instructions, refer to the “check for leaks" section of
this manual.)
2
4
2
4
Summary of Contents for Curve MTC-CURVE-GM-LP
