Required tool (not included): Adjustable wrench
1. The swing consists out of 4
parts, 2 ropes and the swing
mat.
2. Place the swing mat on the ground
and place the 4 Velcro tapes like
shown on the photo.
4. Place the tubes like shown.
3. Slide the metal tubes with
foam into the covers, as shown
on the photo.
5. Slide the 2nd tube through
the cover and connect it with the
1st tube.
6. Repeat and form a half circle, like
on the photo.
7. Repeat the steps until a circle is
formed.
8. Pull the turning bolt, which is fixed
to the rope, through the fabric
9. Ensure there is enough space for
later fixing the turning bolt to the
frame.
10. Fix the turning bolt to the frame.
11. Fix it firmly with the turning nut
12. Tighten with a wrench.
13. Finish the fixation with a
wrench.
14.Repeat this 3 times .
15. End result
P L A Y
OUTDOOR