Why is the red LED flashing twice every 20 seconds?
The battery is low. Recharge it.
Why is the red LED off when charging?
A. Make sure the connection between the charging
cable and the CHIPS
TM
2.0 is tight.
B. If the CHIPS
TM
2.0 haven’t been used in awhile, the
light may not come on immediately. Charge the
battery for at least 30 minutes.
Why can’t I pair my CHIPS
TM
2.0
?
A. Your Bluetooth device and the
CHIPS
TM
2.0
must both
be in pairing mode.
B. Your
CHIPS
TM
2.0
should not be paired to any other
devices.
Why do I have Bluetooth signal loss/dropout/unclear
conversations?
A. Move your device closer to your CHIPS
TM
2.0.
B. Make sure your CHIPS
TM
2.0 are charged up.
C. Turn off your CHIPS
TM
2.0 and device, then power up
and reconnect.
Why can’t the CHIPS
TM
2.0
hear my voice during a call?
A. Make sure the CHIPS
TM
2.0 are on.
B. Make sure the volume is not too low or muted.
C. Make sure the CHIPS
TM
2.0 are properly connected
with your device.
D. Make sure the CHIPS
TM
2.0 are within range of your
device.
FAQ
