Appliances and Equipment - continued
Oven Operation (if equipped)
Oven pilot must be lit prior to operating.
Lighting Oven Pilot
Be sure all valves and oven control knob are in the "OFF" position. Assure the main gas supply is
on. Open oven door and smell for gas. If odor present - Stop and:
1. Do not try to light any appliance.
2. Extinguish any open flames including cigarettes.
3. DO NOT TOUCH ANY ELECTRIC SWITCH.
4. Open windows and doors.
5. Exit trailer.
6..Shut off the gas supply at the gas bottle or source.
7. Immediately call a service center or gas supplier from an outside phone and follow
their instructions.
8. Do not turn on the gas supply until the gas leaks have been repaired.
If no gas smell present, light a match, depress and turn oven control knob to "Pilot Zone" and light
pilot.
Operation of Oven Burner
Depress oven knob and turn to desired setting. (A delay of appox. 45 seconds will occur before
burner is lit - This is normal)
To Shut Down Oven Burner
Turn oven control knob to "Pilot On" position - This will keep the oven pilot lit.
To Shut Down Oven Pilot
Turn oven control knob to "OFF" position.
Care and Maintenance
Before cleaning make sure all knobs are in the "OFF" position and wait until all surfaces, including
burners, are cool. Use warm soapy water only. Do not use oven cleaners, bleach or rust removers
on the range/cook top surface. Wipe up any spills as soon as possible to avoid possible
discoloration or pitting on the surface. Check burner ports when cleaning. If ports or the orifice is
clogged, carefully clean with a toothpick.
71
Summary of Contents for 2013 Creek Side
Page 1: ......