15
GB
CLEANING
Close the regulator completely and clean the
appliance before putting it into storage. It is
especially important to clean the appliance if
it will not be used for a prolonged period.
FITTING THE GAS CARTRIDGE
• Close the brass regulator fully.
• Check that the seal and pin are in good
condition.
• Check that the used gas cartridge is
completely empty before replacing it.
The regulator must always be fully closed
before replacing the gas cartridge.
Read the instruction manual
before use.
For outdoor use only.
The gas blow torch should
be stored out of the reach of
children in a dry, dust-free and
well-ventilated location.
The burner and the area
around it will get very hot
during use. Avoid touching
these parts and allow them to
cool fully before transporting
or storing the gas blow torch.
IGNITING THE GAS BLOW TORCH
• The appliance is equipped with
automatic ignition. Press the button as
you slowly turn it.
• Adjust the � ame by turning the regulator.
EXTINGUISHING THE GAS BLOW
TORCH
• Close the regulator fully to extinguish the
gas blow torch.
Service centre
Note: Please quote the product model
number in connection with all inquiries.
The model number is shown on the front of
this manual and on the product rating plate.
For:
• Complaints
• Replacement parts
• Returns
• Guarantee issues
• www.schou.com
Manufactured in P.R.C.
Manufacturer:
Schou Company A/S
Nordager 31
DK-6000 Kolding
All rights reserved. The content of this manual may not
be reproduced, either in full or in part, in any way by
electronic or mechanical means, e.g. photocopying or
publication, translated or saved in an information storage
and retrieval system without written permission from
Schou Company A/S.
