Owner & Safety Manual
D.863.000.V1
En-5
OUTLAND FIREBOWL
®
CYPRESS OWNER & SAFETY MANUAL
SECTION 1:
ASSEMBLY
STEP 1
Enclosed are four bags of rocks, one factory installed 10'
propane-rated hose with attached regulator, one propane tank
stabilizer ring, one lid and one carry strap.
SECTION 2:
IGNITION
STEP 1
Ensure that unit valve dial is in the
“OFF” position by pushing and turning
clockwise until the dial stops.
STEP 2
Securely attach regulator
(large end of hose) to your
propane cylinder.
NOTE TO USER:
Before igniting the unit for the first time, follow steps one
through 5 in the below Ignition section.
STEP 5
The fourth bag of rocks are included as spares and
labelled “Spare Rocks”. These can be stored and used as
replacements or deployed for additional coverage depending on
preference.
Our preferred configuration is
pictured here.
Never handle rocks which
have not been allowed to
cool from exposure to flame.
Never attempt to rearrange
rocks while unit is ignited.
STEP 2
Remove plastic bags containing the rocks, propane
stabilizer ring and cover and carry kit.
STEP 3
Open the two bags containing mid-sized rocks, labelled
conveniently for you “M” and arrange in burner area.
STEP 4
Open the single bag containing larger sized rocks, labelled
conveniently for you “L” and arrange on top of the medium sized
rocks.
Your included Cover & Carry
kit is to be used for storage and
transportation as shown.
Note:
• Rocks are not to exceed a
maximum weight of 2 kgs
or 4.4 lbs.
• Never use a lid to extinguish
the flame on your Outland Firebowl
®
• The lid and carry straps (Cover & Carry Kit) is to be used for
storage and transportation only.
WARNING:
Never use the lid to cover your Outland Firebowl® while the
Firebowl burner is in operation. After use allow the Firebowl to
cool for at least 10 minutes prior to deploying the lid and carry
strap.
