1-888-514-1663
| WWW.OUTLANDLIVING.COM
En-7
STEP 6 (continued)
Assemble the natural gas valve (part 2).
Note: Ensure the arrow on the knob
aligns with the OFF indicator on the
valve cover when the valve is set in
the closed position. To check, push
and turn the knob clockwise until it
stops. The arrow on the knob should
be aligned with the OFF indicator on
the valve cover at this point.
OFF
STEP 7
Slide the heat shrink tubing (part 3) over the burner venturi tube.
STEP 8
Mount the new natural gas bracket assembly.
Use the same 4x screws which held the propane gas valve assembly.
Important: Ensure the gas valve orifice is aligned to sit inside the burner venturi tube.
NATURAL
GAS VALVE
GAS HOSE COUPLING
(ENSURE COUPLING
FACES DOWN)
BURNER VENTURI TUBE
GAS VALVE ORIFICE
NATURAL GAS VALVE
HEAT SHRINK TUBING
