background image

PORTABLE PROPANE

TONGA TORCH

En-9

Conversion Kit  

Owner and Safety Manual

D.772.000.V1

OUTLAND LIVING PORTABLE PROPANE TONGA TORCH - CONVERSION KIT OWNER AND SAFETY MANUAL 

SECTION 8:

 EXTINGUISHING THE APPLIANCE

STEP 1

1. Turn gas valve on appliance to “OFF” position. 
2. Wait for flame to visibly extinguish. 
3. Disconnect the cylinder when not in use.

STEP 2

Allow unit to cool for at least five (5) minutes before relighting.

Upon igniting the appliance, visually 
verify that the burner is indeed burning 
as demonstrated in the image to the left. 
The presence of flames will confirm that 
the burner is burning.

Periodically check that the burner flame 
is present during operation by visually 
inspecting the burner to ensure the 
presence of flames. 

SECTION 7: 

PERIODIC INSPECTION OF BURNER FLAMES

If there are no flames present, as 
demonstrated in the image to the left, 
the appliance is likely not burning. If this 
is the case, IMMEDIATELY turn the valve 
to the “off” position if it is not already. 
Allow unit to cool for at least five (5) 
minutes before relighting. Repeat the 
ignition procedure (See section labelled 
“IGNITION”).

 WARNING NOTES:

•  The portable propane Tonga Torch appliance is NOT a toy.

•  Never leave this appliance unattended while in operation.

•  Expected burn time: Your torch has a maximum power rating 

of 7,000 BTU / hr. You can expect a 3 - 3.5 hour burn time for 
your OUTLAND Tonga propane torch, assuming you start 
with a full 16 oz. / 453 g (1 lb.) LP propane cylinder (25,000 BTU 
capacity) and that you use it with the gas valve fully open. 
Using the torch with a lower flame intensity will increase the 
burning time.

•  When using this unit, children should be supervised at all 

times, without exception.

•  Do not place any objects inside the burner component.

•  Do not add wood or any other materials to the fire. It is 

designed to safely combust propane only.

•  Solid fuels shall not be burned in this appliance.

•  Keep the appliance area clear and free from combustible 

materials, gasoline and other flammable vapors and liquids.

•  Do not connect to a remote gas supply.

•  Do not use this appliance if any part has been under water. 

Immediately call a qualified service technician to inspect the 
appliance and to replace any part of the control system and 
any gas control which has been under water.

•  Always inspect and clear all valve and gas orifices of any 

foreign debris including spider webs prior to lighting.

IMPORTANT: Only use the base provided.

•  Appliance accessories and parts can be purchased at  

www.outlandliving.com or by calling 888-514-1663.

•  Replacement parts:

 

• FMTT-103 Low pressure gas hose and regulator

Summary of Contents for TTCK 102













Reviews: