3
ECS-10 Enhanced Cube Subwoofer
Owner’s Manual
The contents of this manual are Copyright © 2009 by Outlaw Audio, LLC, and may not be
duplicated or reproduced by any means, whether physical, electronic or otherwise without
prior written consent from Outlaw Audio.
Outlaw Audio and the Outlaw Audio logo are registered trademarks of Outlaw Audio, LLC.
Specifications are those in effect at the time of printing. Outlaw Audio reserves the right
to change specifications or designs at any time without notice or obligation to modify
existing units.
Table of Contents
2 Please Read First
3 Table of Contents
3 Outlaw Audio Enhanced Cube Subwoofer ECS-10
3 Unpacking
3 Before You Begin
4 Subwoofers, Bass and Overall System Performance
5 ECS-10’s Controls and Connections
5 Setup Guide
5
Connecting to Your System
5
Connecting to a System with a Subwoofer Preamp Output
6
Connecting to a System without a Subwoofer Preamp Output,
but with Standard Left/Right Preamp Outputs
7
Connecting to a System with no Preamp Outputs
8 Subwoofer Placement
8
Notes On Subwoofer Placement
8 Setting the ECS-10’s Controls
8
Phase Switch
8
Variable Crossover
8
Volume Level
9 The Scattered Subwoofer System (Two ECS-10’s)
9
What’s Needed to Connect Two Subwoofers?
9
Placement and Level Control
9 Care and Maintenance
9
Cleaning
9
When You Are Away
9 Troubleshooting
9
Troubleshooting Guide
10
Outlaw Service Information
10
The Outlaw Audio 30-Day Satisfaction Guarantee
10
ECS-10 Enhanced Cube Subwoofer Specifications
11
Outlaw Audio Limited Warranty
Outlaw Audio
Enhanced Cube Subwoofer
ECS-10
Congratulations on the purchase of an Outlaw Audio ECS-10 Enhanced Cube
Subwoofer. The ECS-10 provides deep, tight, bass extension that’s powerful enough
to meet the most demanding requirements of any movie or musical source.
Thanks to a flexible crossover system that may be defeated for use with advanced
bass management systems, the ECS-10 blends seamlessly with both small satellite
speakers as well as large tower type speaker systems.
The ECS-10’s high-power and long-throw woofer are housed in a cabinet that
measures just over a cubic foot, ensuring that your new subwoofer can be tucked
away out-of-sight in almost any listening environment.
Among the ECS-10’s many features are:
■
A long throw 10” driver for deep bass extension
■
Oversized spider for increased linearity at high excursion
■
A powerful 1,000 watt RMS (2000 watts dynamic) amplifier for precision
driver control
■
Signal Sense for automatic turn on/off (can be defeated)
■
0/180-degree phase control
■
Stereo line level and speaker level inputs
■
LFE input
Unpacking
The carton and packing materials used in shipping your new subwoofer were
specially designed to cushion it from the shocks and vibrations of shipping. We
strongly suggest that you save the carton and packing materials to use if you move,
or if the unit ever needs to be shipped back to us for any reason.
To minimize the size of the carton in storage, you may wish to flatten it by carefully
opening the top and bottom flaps and folding the carton flat. Packing materials
that cannot be collapsed should be saved along with the carton in a plastic bag.
Before You Begin
Before proceeding with the integration of the ECS-10 into your system, please
observe the following precautions and suggestions.
■
Do not plug the power cord into the ECS-10 until all other connections are
made.
■
Always refer to the instructions that came with the receiver or processor for
specific procedures, warnings and options.
■
Make sure to insert all plugs and connectors securely. Improper connections
can result in noise, poor performance, or damage to the equipment.
■
Do not bundle the subwoofer cable or speaker wire with the power cord. This
may adversely affect the sound quality and introduce unwanted hum into
your system.
Outlaw Audio Enhanced Cube Subwoofer ECS-10
Summary of Contents for ECS-10
Page 1: ...Owner s Manual Version 1 0 Enhanced Cube Subwoofer ECS 10...
Page 12: ......
