Outlaw Audio
2
Please Read First
CAUTION:
To reduce the risk of electric shock, do not remove the cover.
No user serviceable parts inside. Refer to qualified personnel.
WARNING:
To reduce the risk of fire or electric shock, do not expose this
appliance to rain or moisture.
¼
Read Instructions
All the safety and operating instructions should be
read before the unit is operated.
¼
Retain Instructions
The safety and operating instructions should be
retained for future reference.
¼
Follow Instructions
All operating instructions should be followed.
¼
Cleaning
Unplug the unit from the wall outlet before cleaning. The
unit should be cleaned only as recommended by the manufacturer.
¼
Attachments
Do not use attachments not recommended by the unit
manufacturer as they may cause hazards.
¼
Water and Moisture
Do not use the unit near water–for example,
near a bath tub, wash bowl, kitchen sink, or laundry tub; in a wet base-
ment; or near a swimming pool.
¼
Power Sources
The unit should be operated only from the type of
power source indicated on the marking label. If you are not sure of the
type of power supplied to your home, consult your unit dealer or local
power company.
¼
Power-Cord Protection
Power-supply cords should be routed so that
they are not likely to be walked on or pinched by items placed upon or
against them, paying particular attention to cords where they enter a plug,
or a convenience receptacle, and the point where they exit from the unit.
¼
Lightning
For added protection for the unit during a lightning storm, or
when it is left unattended and unused for long periods of time, unplug it
from the wall outlet and disconnect the antenna or cable system. This will
prevent damage to the unit due to lightning and power-line surges.
¼
Overloading
Do not overload wall outlets, extension cords, or integral
convenience receptacles as this can result in a risk of fire or electric shock.
¼
Object and Liquid Entry
Never push objects of any kind into the
unit through openings as they may touch dangerous voltage points or
short-out parts that could result in a fire or electric shock. Never spill
liquid of any kind on the unit.
¼
Servicing
Do not attempt to service the unit yourself as opening
or removing covers may expose you to dangerous voltage or other
hazards. Refer all servicing to Outlaw Audio.
¼
Damage Requiring Service
Unplug the unit from the wall outlet and
refer servicing to Outlaw Audio under the following conditions:
»
When the power-supply cord or plug is damaged,
»
If liquid has been spilled, or objects have fallen into the unit,
»
If the unit has been exposed to rain or water,
»
If the unit does not operate normally by following the operating in-
structions. Adjust only those controls that are covered by the operating
instructions, as an improper adjustment of other controls may result
in damage and will often require extensive work by Outlaw Audio to
restore the unit to its normal operation,
»
If the Ultra-X12 has been dropped or damaged in any way, the unit
should be examined by Outlaw Audio.
»
When the unit exhibits a distinct change in performance–this indicates
a need for service.
Verify The Line Voltage
Your new Subwoofer has been factory configured for 120 volt AC lines.
Connecting the Ultra-X12 to a line voltage other than that for which it
is intended can create a safety and fire hazard, and may damage the
subwoofer. If you have any questions about the voltage requirements for
your specific model, or about the line voltage in your area, contact Outlaw
Audio before plugging the unit into a wall outlet.
Verify AC Circuit Capacity
The high power output of your Ultra-X12 may require heavy power draw
under full load conditions; connecting it to a circuit used by other heavy
power devices, such as air conditioners, may cause circuit breakers to trip.
It is always a good idea to avoid using any audio or video equipment on
the same AC circuit as equipment with motors, such as air conditioners or
refrigerators. This will lessen the possibility of power variation and electrical
start-up noise affecting your sound system.
Extension Cords and Power Strips
We do not recommend that extension cords be used with this product
unless they are of sufficient gauge to pass the necessary current during full
load conditions. Most inexpensive extension cords are not capable of such
high-current loads. Similarly, should you use a power strip, surge protector or
any type of AC power line conditioning equipment, make certain that it is also
able to handle the high current loads this product will produce.
Handle the AC Power Cord Gently
When disconnecting the power cord from an AC outlet, always pull the
plug, never pull the cord. If you do not intend to use the subwoofer for
any considerable length of time, disconnect the plug from the AC outlet.
If the power cord is replaced, make certain that it is of similar gauge. As
with all electrical devices, do not run power cords under rugs or carpets or
place heavy objects on them. Damaged power cords should be replaced
immediately with cords meeting factory specifications.
Wiring
Cables that are run inside of walls should have the appropriate markings
to indicate complaince with, and listing by the UL , CSA or other standards
required by the UL, CSA, NEC or your local building codes. Questions about
cables inside of walls should be referred to a qualified custom installer, or a
licensed electrician or low-voltage contractor.
Do Not Open The Cabinet
There are no user serviceable components inside this product. Opening the
cabinet may present a shock hazard, and any modification to the product will
void your warranty. If water or any metal object, such as a paper clip, coin or
a staple, accidentally falls inside the unit, disconnect it from the AC power
source immediately, and contact Outlaw Audio for further instructions.
IMPORTANT SAFETY NOTE
Before connecting a new component such as the Ultra-X12 to your audio
or home theater system, it is always good practice to make certain that all
components are turned off, and preferably unplugged from their AC power
source. Many modern electronics products feature automatic turn-on circuits
that may be activated during an installation, causing the potential for damage
to electronic components and/or speakers. Such damage is not covered by
product warranties and Outlaw Audio specifically disclaims responsibility for
any such damage.
Unpacking
The carton and packing materials used in shipping your
new subwoofer were specially designed to cushion it from
the shocks and vibrations of shipping. We require that you
save the carton and packing materials in case the unit ever
needs to be shipped back to us for any reason.
To minimize the size of the carton for storage, you may
wish to flatten it by carefully opening the top and bottom
flaps and folding the carton. Packing materials that cannot
be collapsed should be saved along with the carton in a
plastic bag.
Your new Ultra-X12 subwoofer is engineered using
heavy-duty materials for high reliability and weighs 66
pounds and requires that you pay special attention during
unpacking and installation. You may wish to have someone
help you remove the unit from its carton and place it in the
proper location.
Save all packing materials
WARNING: Important Safeguards
The lightning flash with arrowhead, with in an equilateral
triangle, is intended to alert the user to the presence of
uninsu lated “dangerous voltage” within the product’s
enclosure that may be of sufficient magnitude to constitute
a risk of electrical shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating maintenance (servicing) instructions in the
literature accompanying the appliance.
Precautions
