OUTLINE S.R.L.
Via Leonardo da Vinci, 56
25020 Flero (Brescia) Italy
Tel.: +39 030.3581341
Fax +39 030.3580431
info@outline.it
www.outline.it
4
2. DESCRIPTION OF THE SYSTEM
As in all Outline products, every single component,
the cabinet and relative dimensions, are the result of
accurate choices following specific studies based on
the idea of the design of the element in question, re-
garding its use as part of a complete system.
Superfly
is a three-section active system with no
passive crossover filter and fitted with:
• two 10”” woofers with double reflex (band-
pass) loading for the low frequency section
(two separate amplification channels);
• two 8” mid-woofers coupled with band-pass
hybrid loading with partially horn-loaded out-
put for the mid frequencies (one amplification
channel);
• a compression driver with a 3” diaphragm,
coupled with a D.P.R.W.G. waveguide, and a
constant directivity horn for accurate horizon-
tal dispersion control for the high frequency
section (one amplification channel).
The cabinet is constructed Baltic birch plywood and
undergoes a precise assembly process: some parts
are made with curved wood, whereas other sections
are formed from appropriately shaped panels. This
enables to obtain a very rigid cabinet without any in-
ternal resonance. Useful external handles are fitted
to facilitate handling and installation to the utmost.
The material used, along with the polyurea coating,
enables the system to be used even in the event of
rain.
The flying hardware is built into the cabinet’s
structure: the side bars are fixed, whereas the rear
ones have moveable elements that enable to set the
flying angle. All bars are manufactured in anodized
aluminium alloy to ensure that they are light-weight
and long-lasting, whereas the quick-locking pins are
in steel and ensure anchorage. Rigging instructions
are contained in the “
Superfly / Mantas 28 Rigging
Manual”.
