OUTLINE S.R.L.
Via Leonardo da Vinci, 56
25020 Flero (Brescia) Italy
Tel.: +39 030.3581341
Fax +39 030.3580431
info@outline.it
www.outline.it
9
It is important to periodically check the conditions
of the cables and connectors, as they carry voltage
that is potentially dangerous in the event of coming
into direct contact with parts of the body.
These checks are also carried out to prevent any
damage to the components and amplifiers, and above
all to avoid faulty system operation.
0.25° - REST
0.5° - 2.5° - 4.5°- 6.5°
1° - 3° - 5°- 7°
1.5° - 3.5° - 5.5°- 7.5°
0° - 2° - 4°- 6°
0.25° ONLY
0.25 - REST
0.5° - 2.5° - 4.5°- 6.5°
1° - 3° - 5°- 7°
1.5° - 3.5° - 5.5°- 7.5°
0° - 2° - 4°- 6°
0.25° ONLY
UPPER SPEAKER
LOWER SPEAKER
UPPER SPEAKER
DEFAULT
DEFAULT
INPUT
LINK
LOWER SPEAKER
Made in Italy
MODEL
& S.N°
TESTED
WEIGHT
www.outline.it
CONNECTION SECT.
Pmax
Zmin
HF
G(+)/H(-)
120 W 15.9 ohm
MF
E(+)/F(-)
400 W 12.6 ohm
LF2
C(+)/D(-)
450 W 14.4 ohm
LF1
A(+)/B(-)
450 W 14.4 ohm
S.N°: KKKFT514
MODEL: O SFY210
TESTED
WEIGHT: 39 kg (86 lb)
www.outline.it
SUPERFLY 210
The nominal impedance is 16 Ohms for each if the
four power channels. This enables to connect four el-
ements in parallel on the same number of amplifica-
tion channels, thus obtaining optimum energy trans-
fer from the amplifiers to the sound system.
The components’ electroacoustic characteristics
are therefore sized coherently with the aforemen-
tioned criteria to obtain maximum dynamic perfor-
mance from the array, while also ensuring conditions
of extreme reliability and very low distortion. Any con-
figuration other that foreseen will not perform equal-
ly well and, in some cases, could compromise the
correct operation of the sound system.
