background image

Page 4

For technical questions, please call 1-888-866-5797.

Item 56226

        

Installation Instructions

Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this 
document including all text under subheadings therein before set up or use of this product.

1.   Insert the MicroSD card into the Dashcam 

gently until it locks into place.

2.  If it has not been formatted, the memory card may 

need to be formatted before it can be used.  This 
will erase all information currently on the card.

3.  Determine mounting location in accordance 

with vehicle safety regulations.  Do not obstruct 
the driver’s view or in the operational area of 
any airbag.  An example location is shown 
which may be appropriate for some vehicles.

WARNING!

 Do not leave Camera unsecured.

4.  Clean the mounting location using rubbing alcohol 

(not included).  Allow it to dry completely.

5.  Determine which Mounting Bracket to use for 

the best filming and viewing angle.  Remove 
the adhesive backing and carefully attach the 
Dashcam Mounting Bracket to the windshield.

6.  Attach the Dashcam to the Mounting Bracket.

7.  Connect Charger cable to the Dashcam.

8.  Route cable around windshield so 

it is not obstructing visibility.

9.  Plug the Charger into the 12V socket.

10.  Adjust the angle of the Camera as needed.

Summary of Contents for 56226









Reviews: