12
RANDOM
Creates a random pattern of flashes that can be adjusted to look similar to lightning, welding
or other flashing effects. The ON/OFF button can be used to turn the effect on or off, and the
FLASH button can be used to create ‘bursts’ of random flashing
SETTING
RANGE
DESCRIPTION
BRIGHTNESS
0-100%
Maximum flash brightness
FREQUENCY
1-50Hz
Frequency of random effect
LENGTH
2-200mS
Maximum length of any flash
VARIATION
0-100%
Amount the brightness is allowed to vary
from the BRIGHTNESS setting. 0 = No
Variation (flashes will all be same bright-
ness). 100 = Flashes can be any brightness
COLOUR TEMP
2700-6500K
Approximate colour temperature
TIMED FLASH
Used to create flashes of a defined duration, similar to a Studio Strobe light. A modelling level
can also be set. The flash can be triggered by pressing the FLASH button, or if ‘External Trig-
gering’ is enabled (see page 15) it can be triggered from an external source such as a camera
hotshoe.
SETTING
RANGE
DESCRIPTION
MODEL LEVEL
0-100%
Modeling light output level
FLASH LEVEL
0-100%
Light output when FLASH triggered
FLASH TIME
1/5
TH
-
1/5000
TH
Sec
Duration that light is flashed ON for
COLOUR TEMP
2700-6500K
Approximate colour temperature
