Warning:
The appliance shall only be installed or operated with maximum height from the rim
of reflector to the ground, so the adjustable device shall be fixed according to this
requirement.’
Use only regulator and hose approved for LP Gas at the correct pressures and gas
type.
The pressure adjuster should comply with the standard EN16129 and current
regulations in the country where it is
installed, which may be found at your nearest retailer of gas items.
Refer to the technical date. It is strictly prohibited to use adjustable pressure.
The life expectancy of the regulator is estimated as 10 years. It is recommended
that the regulator is changed within 10 years of the date of manufacture or the
national conditions require it.
-Using 30mbar butane regulator for butane of I3B/P (30) or butane of I3+.
-Using 30mbar propane for propane or butane/propane mixture of I3B/P(30).
-Using 37mbar butane regulator for butane of I3B/P (37).
-Using 37mbar propane regulator for propane or butane/propane mixture of I3B/P
(37) or I3P (37).
-Using 50mbar butane regulator for butane of I3B/P (50).
-Using 50mbar propane regulator for propane or butane/propane mixture of I3B/P
(50) or I3P(50)
The type of replaceable hose should meet the standard of EN16436.
The hose used must conform to the relevant standard for the country of use. The
length of the hose must be 0.7 meters (minimum) and 1.5 meters (maximum). Worn
or damaged hose must be replaced. Ensure that the hose is not obstructed nor
kinked. It is recommended that the hose is changed within 1 year of the date of
manufacture or the national conditions require it.
Summary of Contents for 842-186
Page 13: ......
