3
19. If the unit or power cord is damaged, it must be repaired by the manufacturer, its
service agent or a qualified electrician.
20. When assembling, keep clear from flammable materials.
21. Children must be constantly supervised when near this product.
22. The unit is for household use only. It is not safe to use on a building site,
greenhouse, barn or stable where there's flammable dust.
23. The head of the unit gets very hot during use – do not touch to avoid scalding.
24. Before cleaning, unplug the unit and wait until it cools down.
25. Do not use in places where there is dust, steam, gas, etc.
26. Do not use this unit to dry clothes, towels or other fabrics
27. Do not use this unit as a sauna.
28. Do not
use this unit as a room heater.
29. Do not immerse this unit in water when cleaning.
30. T
he unit should be plugged into a socket, which is easily visible and reachable.
31. When turned on, there might be a dark point on the surface for the first few
minutes. This is normal – it will not affect the performance of the unit
.
32. Do not
use this heater in the immediate surroundings of a bath, shower or
swimming pool.
33. WARNING!
To avoid overheating, do not cover the heater.
34. Do not use this heater with a programmer, timer, separate remote control
system or any other device that turns the unit on automatically. Covering or
positioning the heater incorrectly is a fire hazard.
35. T
he appliance is not to be used by children or persons with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless
they have been supervision or instruction.
1.
Assembling Process
Step 1: Make four holes into the floor, then fix the heater using four wedge bolts.
Tighten the screws using a spanner.
Complete!
