• Example:
Select SNMPv3, add new user, and key in correct security user
name(write). Select the same authentication type with camera setting
for authentication protocol(MD5), and key in authentication password
of write security. Select the same encryption type with camera setting
for privacy protocol (DES), and key in encryption password of write
security. Click OK to add the user who has write authority to the
camera. Connection succeeds.
If you want to add the new user who has read authority, key in
correct security user name(public), key in authentication password of
read security, and key in encryption password of read security.
(iii) SNMPv1/SNMPv2 Trap:
Trap is a mechanism that allows the managed device to send
messages to manager instead of waiting passively for polling from
the manager. Specify the trap event. When those events happen, the
camera will send the ring message to the Trap Address, which is usually
the manager's IP address. Trap Community means the community that
can receive the trap message.
Note: Trap Address must be under the same LAN with IP camera.
