Ovarro LD Ltd
User Manual
XiLOG 4G/IOT
Document Number:
Template Number: IXD-956 iss 05
Version: 1.0
Page 24 of 42
5.10
Configure Channels - Millivolt Screen
The
Millivolt
screen enables configuration of the analogue
connector millivolt values corresponding to the external
pressure sensor readings. Click the tick (
) to commit
configuration changes to the logger.
Name
– Defines name of the channel that will be
displayed in Primeweb.
Units
– Specifies the pressure units to be used (BAR or
PSI).
Log Every
– Defines the required logging interval for
pressure measurement data (1sec to 1 hour).
Sensor Configuration
Units
- Specifies the units for pressure (BAR or PSI).
Max (Bar)
– Specifies the maximum pressure measured
by the sensor.
mV at max
– Specifies the voltage (in millivolts) at
maximum pressure.
XiLOG GO - Millivolt Screen
