Ovation E-160WW QRG
EN
3
AC Power
This product has an auto-ranging power supply that can work with an input voltage
range of 100–240 VAC, 50/60 Hz.
Power Linking
You can link up to 15 Ovation E-160WW products at 120 V, 26 products at 208 V,
or 28 products at 230 V. Never exceed this number. Power linking cords can be
purchased separately.
AC Plug
Connection
Wire (U.S.)
Wire (Europe)
Screw Color
AC Live
Black
Brown
Yellow/Brass
AC Neutral
White
Blue
Silver
AC Ground
Green/Yellow
Green/Yellow
Green
To eliminate unnecessary wear and improve its lifespan, during periods of
non-use completely disconnect the product from power via breaker or by
unplugging it.
Replacing The
Fuse
1.
Disconnect this product from power.
2.
Using a flat head screwdriver, unscrew the fuse holder cap from the housing.
3.
Remove blown fuse and replace with a good fuse of the same type and rating.
4.
Screw the fuse holder cap back in place and reconnect power.
DMX Linking
The Ovation E-160WW will work with a DMX controller using a 3- or 5-pin
DMX serial connection. A DMX Primer is available from
DMX Connection
The Ovation E-160WW uses a 3- or 5-pin DMX data connection for its DMX
personalities:
1Ch
,
2Ch
,
3Ch
, and
6Ch
. See the User Manual for information
about connecting and configuring the product for DMX operation.
Master/Slave
Connection
The Ovation E-160WW uses the DMX data connection for its Master/Slave mode.
See the User Manual for information about connect and configure the product for
master/slave operation.
RDM
(Remote Device
Management)
Remote Device Management, or RDM, is a standard for allowing DMX-enabled
devices to communicate bi-directionally along existing DMX cabling. Check the
DMX controller’s User Manual or with the manufacturer as not all DMX
controllers have this capability. The Ovation E-160WW supports RDM protocol
that allows feedback to make changes to menu map options. Download the User
Manual from
for more details.
