9
1-2.
Ensure the base and wall are leveled. Place 2 metal tracks (B) approximately 25mm (1
"
) from the edge of
the acrylic wall to the center of the holes of the metal track.
3-4.
Mark the holes clearly on the wall.
5.
Remove tracks and drill pilot holes in the marked locations with a
Φ
3mm drill bit.
6-7.
Replace and secure the metal tracks (B) with screw (DD), fitting (GG) and cap (HH). Do not overtighten.
WALL TRACKS INSTALLATION
3
25mm
DD
GG
2
B
1
4
25mm
Φ 3mm
B
5
6
7
HH
GG
DD
HH
Helpful Hint
Do not overtighten!
This may crack the
acrylic walls.
Helpful Hint
Make sure there
is a support stud
located behind the
drywall, behind the
tracks!
