USING THE GRILL
Caution:
Because some countertop finishes are affected by heat more than others, use
care not to place grill on surfaces where heat may cause a problem.
1.
Before first use, see Maintenance and hints for care and use of non-stick surface.
2.
Always place the appliance on a flat, clean and non-slippery surface before operating.
3.
Always place the appliance on a heat resistant surface as the grill plate reaches
high temperatures.
4.
Always leave a gap of approximately 8 inches around the exterior of appliance. Never use
near curtains, walls, under cupboards or other flammable materials.
Caution:
Grill surfaces are hot during use.
5.
Place drip pan into base.
6.
Fill drip pan with water to maximum level indicated to make cleaning easier and help
eliminate smoke.
7.
Position the grill plate into base. Grill may be positioned with the control at the right
or left,as desired.
8.
Plug the Power Cord/Temperature Controller, into the grill first, ensuring the
temperature is set to OFF position with the control dial facing upwards. Plug the power
cord plug into a suitable wall outlet corresponding to the supply requirements of the grill
switch power ON.
Note:
There may be a small amount of smoke and smell during the first use of the
appliance as this is normal.
4
ovente.com
