VISOR INSTALLATION
Unpacked the hair dryer head and visor from its packaging.
Unscrew the bolt from the hinge (refer to figure 1)
Align visor on top of the hinge (refer to figure 2)
Insert the bolt into the hole of the visor and hinge and place the nut on the end of the bolt. While
holding the head of the bolt stationary spin the nut clockwise while applying gentle pressure against
the nut toward the bolt (refer to figure 3 and 4)
Gently and securely tighten the bolt and nut with a screw driver (not included) to avoid breakage
(refer to figure 5)
ELECTRICAL REQUIREMENTS
Voltage:
120V
Power:
1000W
Hertz:
60Hz
6
ovente.com
Summary of Contents for HDS223 Series
Page 3: ......
