en
33
Adjustments
Tr
oubleshooting
Data comm
unication
Note:
The controller will only recognise a firm-
ware update file if it is stored in a folder
named "OVENTROP / RQB" on the first
level of the SD card.
Î
Create a folder named "OVENTROP /
RQB" on the SD card and extract the
downloaded ZIP file into this folder.
Starting the logging
Î
Insert the SD card into the slot
Î
Adjust the desired logging type and interval
Logging will start immediately.
Stopping the logging
Î
Select the menu item
Remove card...
Î
After
Remove card
is displayed, remove the
card from the slot
When
Linear
is adjusted in the
Logging type
ad-
justment channel, data logging will stop if the capac-
ity limit is reached. The message
Card full
will be
displayed.
If
Cyclic
is adjusted, the oldest data logged onto the
SD card will be overwritten as soon as the capacity
limit is reached.
Note:
Because of the increasing size of the data
packets, the remaining logging time does not
decrease linearly. The data packet size can
increase, e. g. with the increasing operating
hours value.
Storing controller adjustments
Î
To store the controller adjustments on an SD
card, select the menu item
Save adjustments
.
While the adjustments are being stored, first
Please
wait
, then
Done!
will be indicated on the display.
The controller adjustments are stored as a .SET file
on the SD card.
Loading controller adjustments
Î
To load controller adjustments from an SD card,
select the menu item
Load adjustments
.
The File selection window is indicated.
Î
Select the desired .SET file.
While the adjustments are being loaded, first
Please
wait
, then
Done!
will be indicated on the display.
Adjustment channel
Description
Adjustment range / selection Factory setting
Remove card...
Safely remove card
-
-
Save adjustments
Save adjustments
-
-
Load adjustments
Load adjustments
-
-
Logging interval
Logging interval
00:05 … 20:00 (mm:ss)
01:00
Logging type
Logging type
Cyclic, Linear
Linear
Format card
Format card
-
-
SD card
Formatting the SD card
Î
Select the menu item
Format card
The content of the card will be deleted and the card
will be formatted with the FAT file system.
Note:
To remove the SD card, always select the
menu item
Remove card...
before remov-
ing the card.