30
Transport and storage
Unibox TQ-RTL R-Tronic
102273880-V01.08.2019
Cover
Plastic white
1022776
Genuine
glass white
1022774
Genuine
glass black
1022775
Fixing channel
1022652
1022653
Pipe conduit unit
1022650
Duo connection piece
1022655
Protective tube (see illustIl-
1501184
5. Transport and storage
Transport the product in its original packaging.
Store the product under the following condi
-
tions:
Temperature
range
-25°C to +70°C
Relative air
humidity
max. 70%
Particles
Store dry and free from
dust
Mechanical
influences
Protected from mechani-
cal agitation
Radiation
Protected from UV rays
and direct sunlight
Chemical
influences
Do not store together
with solvents, chemicals,
acids, fuels or similar
substances
6. Installation
6.1 General installation advice
Note the following prior to installation:
•
The lower edge of the "Unibox TQ-RTL
R-Tronic" must be at least 20 cm above the
finished floor.
• The front face of the "Unibox TQ-RTL
R-Tronic" must be level with the finished
wall.
Should the wall not have been
finished, take the plaster and tile
thickness into account.
•
The opening of the wall box unit must face
downward.
•
The thermostat must not be influenced by
other heat sources.
•
Use the enclosed brackets to align and fix
the "Unibox TQ-RTL R-Tronic".
•
There is a blue dot on the wall box unit. A
hole can be drilled at this location in order
to feed through a cable.
• If necessary, use an empty pipe for cable
routing.
NOTICE
Risk of damage due to lubri-
cants
Seals may be destroyed by greasing
agents or oil.
f
Do not use any greasing agents or
oil for the installation.
f
Flush any dirt particles or grease or
oil residues out of the pipework.
f
Consider the latest technical status
(e.g. VDI 2035), when choosing the
operating fluid.
1
2
3
4
5
6
7
Illust. 8: Installation cross section
