Over Armour Offroad
2515 Bypass Rd. Flemingsburg, KY 41041
606-845-7439
Instructions for Installation and Care of 610 Mule Mini Cab Enclosure
KAW-610-MC01
CAUTION: Do not smoke inside the cab or expose the enclosure to direct flames. Product is
FLAMMABLE.
Be sure to read these instructions thoroughly before opening and installing the enclosure.
Installation is best done when the temperature is 60
°
F or warmer.
1.
Carefully open the carton and unroll the enclosure on a large flat surface that is
clean and free of dirt or other material.
2.
Check over the parts included in the carton with the parts list shown below:
Velcro hook strips
6 each
8” long
Velcro hook strips
3 each
10” long
Velcro hook strips
1 each
20” long
Velcro hook strips
2 each
6” long
Enclosure
1 each
3.
Loosely drape the enclosure over the roll cage. Note the correct position for the
10” latch strip on the underside of the front edge of the hood, in the center. Clean
the area with rubbing alcohol, let dry and apply one of the 10” Velcro hook strips.
Attach the enclosure to the strip under the hood. See fig.1.
Fig.1
