Part Number 104373-102 05/2008
©2005 - 2008 Overland Storage, Inc.
Page 2 of 4
2.
Remove the outside packaging (
).
a.
Cut the three (3)
shipping straps
and remove.
b.
Remove the six (6) shipping strap
reinforcing
corners
from around the box.
c.
Remove the
top cap
.
d.
Release and remove each of the eight (8)
plastic
retainers
(four each on opposite corners).
Figure 2. Library Packaging Components (Rear View)
e.
Remove the two (2) large pieces of
cardboard
surrounding the library.
3.
Remove the inner packaging (
).
a.
Remove the two (2)
pads on top
of the library.
b.
Remove the
Ramp and Door boxes
and set them
aside.
c.
Remove the
plastic sheet
that covers the library.
Figure 3. Ramp and Door Box Locations
1.
Remove the
ramps
from the Ramp box and lay them
down, placing the brackets into the corresponding slots
in the pallet (
Figure 4. Placing the Ramps in Position
2.
Remove the
rear hardware
holding the library on the
pallet.
a.
To provide access to the hold-down bolts and leveling
legs, remove the
rear door
of the library; set aside.
b.
Remove the four (4) crossbar screws from the pallet.
c.
Remove the
rear crossbar
(
).
Figure 5. Removing the Rear Crossbar
d.
Using the 9/16” wrench, remove the two
bolts and
hold-down brackets
.
e.
Use the 10” adjustable wrench to loosen and raise
the two
leveling legs
(
on page 3).
N
EO
-8
11
3
Plastic
Strap
Corners
Reinforcing
Shipping
Retainers
Straps
Top Cap
N
EO
-8
14
4
Ramp Box
(Library hidden for clarity)
Front
Top Pads
Door Box
Detaching the Pallet
N
EO
-8
11
5
(Library hidden for clarity)
Slots
Ramps
Crossbar Screws
N
EO
-8
11
6
Front Crossbar
Bolts
(Library hidden for clarity)
Rear Crossbar
(Remove First)