Field Service Documentation
3
Copyright © 2009, Overland Storage, Inc. All rights reserved. Information in this document is subject to change without notice and does
not represent a commitment on the part of Overland Storage or any of its subsidiaries.
Snap Server 410
Adding or Replacing a SCSI Card
Replacing the Top Cover
Be sure to replace the top cover. Do not operate the server if the top cover is not in
place.
1
Lower the top cover onto the server.
2
From the rear of the server, push the cover forward until it is firmly seated.
3
Tighten the thumbscrews.
Restoring Power to the Server
1
If you removed the server from the rack, replace it now.
2
Reattach all cables to the rear of the server.
3
Press the power button on the front of the server.
