10400520-001 Sep 2013
©2010-13 Overland Storage, Inc.
Page 1 of 4
*10400309-001*
SnapDisk
™
E1000 Expansion Array
This document describes how to unpack and install a SnapDisk
E1000 expansion array with ACBEL power supplies into a rack.
IMPORTANT: When using expansion arrays with an S1000
storage array, install the expansions first. The installation of
expansion arrays is an offline procedure so you must shutdown the
S1000 head unit before proceeding.
WARNING:
To reduce the risk of electric shock or damage to
equipment, always remove any power cords while working with
the unit.
AVERTISSEMENT:
Pour réduire le risque de choc électrique
ou endommagement de l'équipement, retirez toujours les
cordons électriques en travaillant avec l'appareil.
CAUTION:
While working with the unit, observe standard
Electrostatic Discharge (ESD) precautions to prevent damage
to micro-circuitry or static-sensitive devices.
Step 1 – Activate Your Warranty!
It is
essential
that you activate your warranty. Technical and
warranty support are
not available
until it is done:
1.
Note the product
serial numbers
from the box labels or
on the product.
2.
Go to the
Overland Storage
web site:
http://www.overlandstorage.com/
3.
Select
Service & Support > My Products
.
4.
e-mail address
and
password
, and click
GO
.
5.
Click
Register New Product
.
6.
Fill in the information and click
Submit
.
7.
Register the
drive assemblies
:
a.
Click the
Manage Products
button.
b.
From the
Product Selector
drop-down list, select the
expansion array.
c.
Click
Add a Component
.
d.
Enter the disk drive
information
.
e.
Click
Save & Exit
.
Your warranty certificate will be emailed to you. Follow the
instructions in the email to complete the registration process.
Enter
Enter
5325301507-SnapSAN E1000, s/n: 0247
