10400424-002 04/2013
©2013 Overland Storage, Inc.
C-1
Appendix C
Cluster Mode Setup
Enable/Disable Cluster Mode
When a higher priority path is recovered from a fault on a static load distribution LUN,
PathManager automatically switches the active path (the higher priority one becomes
active).
If "Cluster Mode" is enabled, PathManager always sets a restored path to an alternate
(HOT) with static load distribution LUN except for a total path failure.
(*1) If you use application servers use Cluster Mode.
How to Enable the Cluster Mode
Follow the procedures below to enable the Cluster Mode.
How to Disable the Cluster Mode
Follow the procedures below to disable the Cluster Mode.