10400424-002 04/2013
©2013 Overland Storage, Inc.
3-18
SnapSAN S3000/S5000 Path Manager Linux User Guide
In each message, X indicates an arbitrary number, p,h,c,s,l indicates a specific path, v,m,se,l
indicates a specific disk, lb, w, pr indicates an attribute of path respectively. Each symbol
description is as follows:
Handling List
Changing the
LU Owner was
failed
sps: Error: Trespass failed /dev/dd
X
(
p
) host:
h
channel:
c
id:
s
lun:
l
I
Error: Changing the owner of LU was failed
Active path is
changed
sps: Info: Change ACT path/dev/dd
X
(
p
) host:
h
channel:
c
id:
s
lun:
l
-
Info: The active path is changed by spscmd command.
Stop the auto
recovering
sps: Warning: Intermittent errors occurred. stopped Failback of path:p I
Warning: Count of intermittent error of a path is reached to threshold
value (default: 3 times), so the path is gotten off the list of auto
recovering.
Path Status
was changed
sps: Info: Asymmetric access state was changed. (/dev/dd
X
)
-
Path/Disk
Message
Description
p
path
Path number
h
host
Host number
c
channel
Channel number
s
scsi-id
SCSI ID
l
lun
LUN number
v
vendor
Vendor name
m
model
Product name
se
serial
Serial number
lb
lbmode
LoadBalance mode
w
watch
Monitoring setting
pr
priority
Path Priority
st
status
Path Status
Number
Handling
I
A failure may be occurred on a path between a server and a disk
array unit.
Get rid of the cause and restore
.
Event
System log message
Handling
(Table)
Phenomenon
