10400455-002
©2008-14 Overland Storage, Inc.
22
SnapScale/RAINcloudOS 4.1 Administrator’s Guide
2 - Initial Setup and Configuration
4.
In the login dialog box, enter
admin
as the user name and
admin
as the password (the
system defaults), then click
Login
.
5.
Complete the
Initial Setup Wizard
to either create a new SnapScale cluster or join an
existing cluster.
Connect Using SSM
1.
Launch
SnapServer Manager (SSM)
.
SSM discovers all SnapServers, SnapScale clusters, and Uninitialized nodes on its local
network segment and displays their Server names, IP addresses, and other information
in the main console. If you do not have a DHCP server, there might be a delay before the
node appears on the network.
NOTE: To distinguish multiple SnapServers and SnapScale nodes, you may need to find their
default names as explained in
Connect Using the Node Name on page 21
2.
If using a DHCP server, proceed to
IP address
to one of the
nodes to be configured in the cluster.
NOTE: Only one node needs to be configured with an IP address in order to create the cluster.
a.
In SSM, right-click the
node name
.
b.
Select
Set IP Address
.
c.
Enter an IP address and a subnet mask, then click
OK
.
3.
In SSM, right-click the node name and select
Launch Web Administration
.
4.
Log into the
Web Management Interface
.
In the login dialog box, enter
admin
as the user name and
admin
as the password (the
system defaults), then click
OK
.
