10400455-002
©2008-14 Overland Storage, Inc.
49
SnapScale/RAINcloudOS 4.1 Administrator’s Guide
3 - SnapScale Settings
3.
Click
Add
.
You are returned to the
UPS
page and the device is shown in the Network UPS Devices table.
The table title UPS count is increased by one. Repeat the process for additional devices.
Change Network UPS Device
To change the settings of a network UPS device:
1.
Select a
device
in the Network UPS Devices field to change.
2.
Click
Change
.
3.
Edit any of the
three options
for the device.
4.
Click
Change
again.
Any changes you make are applied to all nodes that are currently using this device.
Delete Network UPS Device
To delete a network UPS device:
1.
If the device is still connected to
any nodes
, deselect the device from the nodes.
2.
Highlight the
device
in the Network UPS Devices field.
3.
Click
Delete
.
The device is deleted from the list.
