10400455-002
©2008-14 Overland Storage, Inc.
53
SnapScale/RAINcloudOS 4.1 Administrator’s Guide
4 – Network Settings
Storage Network Information
This page shows the information on the private
Storage
network:
Field definitions are detailed in the following table:
SnapScale Storage Network Information
Subnet Mask
Combines with the IP address to identify the subnet on which
the cluster's Storage network interfaces are located.
Bonding Status
Shows Load Balance (ALB), Failover, Switch Trunking, or Link
Aggregation (802.3ad) as the selected bonding.
Multicast IP Address
Multicast address used for inter-node cluster messaging.
Node-specific Storage Network Information Section
Show/Hide Disabled
Ethernet Ports
Use the link on the right above the table to toggle the display
of Ethernet ports that have been disabled. The link is only
available when ports have been disabled (such as, by the
addition of a 10Gb PCIe card disabling the built-in 1Gb ports).
Node
The name of the specific node. The node designated as the
Management node is so noted.
Ethernet Port Status
Shows abbreviated references of the Ethernet ports of the
node and their statuses.
• OK – A blue icon (
) indicates a healthy connection.
• No Link – A yellow icon (
) indicates no link for that port.
• Failed – A red icon (
) indicates that the port has failed.
