10400455-002
©2008-14 Overland Storage, Inc.
66
SnapScale/RAINcloudOS 4.1 Administrator’s Guide
4 – Network Settings
2.
From the drop-down Member list, select
Active Directory Domain
to view the
configuration page.
NOTE: You cannot select Active Directory Domain if NTP is enabled.
3.
Edit the
fields
shown in the following table:
Option
Description
Enable Windows
Networking (SMB)
Check the box to enable SMB and activate the options. Clear the
box to disable.
Member Of
Verify it shows
Active Directory Domain.
Domain Name
The default settings make the SnapScale available in the
workgroup named
Workgroup
. Enter the domain name to which
the cluster belongs.
NOTE: Windows 2000 domain controllers must run SP2 or later.
Administrator Name /
Administrator Password
If joining a domain, enter the user name and password of a user
with domain join privileges (typically an administrative user).
Organizational Unit
To create a machine account at a different location than the
default, enter a name in the field. By default, this field is blank,
signaling the domain controller to use a default defined within the
controller.
NOTE: Sub-organizational units can be specified using Full
Distinguished Name LDAP syntax or a simple path
([org_unit]/[sub-unit1]/[sub-unit1a])
LDAP Signing
Use the drop-down list to set ADS domain LDAP signing to Plain
(no signing), Sign, or Seal, as appropriate for your domain. Default
setting is Plain.
