10400455-002
©2008-14 Overland Storage, Inc.
203
SnapScale/RAINcloudOS 4.1 Administrator’s Guide
7 - System Monitoring
SnapScale Settings
When cluster settings are configured in the Web Management Interface, success or failure of
the operation is determined by the attempt to perform it on the Management node. If
successful, the same configuration operation is pushed to all member nodes in the background.
The
SnapScale Settings
page displays a list of settings that have been applied to the nodes in
the cluster and the status of each setting. When you make changes to your SnapScale via the
Web Management Interface, the settings are applied to the Management node first to
determine success or failure of the configuration, then the settings are applied to the other
nodes in the background. When a SnapScale setting has not been applied yet, its status is
displayed as
Pending
. When a SnapScale setting fails to be applied, its status is displayed in
detail and the failed settings are automatically re-applied until they are successful.
The initial view is compressed to show all nodes and a count of the settings:
PartiallyOnline
A node that is partially online participates in the cluster like a
node that is OK. Some network interfaces which serve public
IP addresses are down, but at least one interface is up.
Status
Description
