10400452-001 05/2013
©2013 Overland Storage, Inc.
Page 3 of 4
Spare Chassis Instructions
Reinstall the Carriers
CAUTION:
The drive assembly carriers MUST be reinstalled
into the same slot they were removed from.
1.
Position a
carrier
in front of the
same slot
from which it
was removed.
2.
Using the
handle
, push the carrier all the way in.
3.
Push the handle back into the carrier until the
latch
locks
(clicks).
4.
all
remaining carriers.
IMPORTANT: To maintain proper airflow and cooling, a drive
assembly or a blank carrier must be installed in
every
slot. No
empty slots are allowed.
Attach the Bezel
Replace the
bezel
on the front of the unit by inserting the left
tabs into the chassis frame and pushing the right side in until
it latches (clicks).
Attach Cables and Power Cords
1.
Reattach the data
cables
to the same connections
previously used.
2.
Attach the
power cords
.
Power New Chassis On
1.
Turn the unit on by pressing the
power button
once for
less than a second.
2.
After the unit boots, access it through the
Web
GUI
to
verify that it is working properly.
1
2
Power Sockets
Cable Ports
Power
Power
LED