background image

 

Limited Warranty 

  What is covered 

Overland Vehicle Systems warrants to the original purchaser that its products are free from defects in 
material and workmanship, for the term described, except as qualified below. The life of the product 
is determined from the date of purchase until such time as the product is no  longer serviceable due to 
normal wear and tear. 

What is not covered 

Overland Vehicle Systems shall not be responsible for the natural breakdown of materials that occurs 
inevitably with extended use (e.g., Ultraviolet (UV) light damage on tents, exhausted zippers), or defects 
caused by accident, abuse, alteration, animal attack, storm damage, misuse or improper care.

 

THERE  ARE  NO  OTHER  EXPRESS  WARRANTIES  BEYOND  THE  TERMS  OF  THIS  LIMITED 
WARRANTY. IN NO EVENT SHALL Overland Vehicle Systems BE LIABLE FOR INCIDENTAL OR 
CONSEQUENTIAL DAMAGES.

 

Some states do not allow the exclusion or limitation of incidental or consequential damages, so the 
above limitation or exclusion may not apply to you.

 

What Overland Vehicle Systems will do? 

If after inspection we find that a product failed due to a manufacturing or material defect, we will repair 
or replace the product, at our option, without charge.

 

How to obtain warranty service 

Return the product, freight prepaid, to Overland Vehicle Systems; or, contact Overland Vehicle 
Systems Customer Satisfaction Department for return authorization: toll free 833.226.4863. Collect 
shipments or shipments without return authorization cannot be accepted.

 

Repairs 

If your tent needs service or repair due to normal wear and tear, animal attack, accident or some 
other reason that is not covered under the warranty, we will provide the necessary service for a 
reasonable charge, plus shipping and handling. We require that products accepted for any repair be 
properly cleaned according to our recommended care instructions. Please send your product or  
component that requires repair (e.g., tent fly), postage prepaid, along with a description

 

of what  need s attention. For   service and repairs, please contact our customer service 
Department: toll free 833.226.4863 

How state law relates to this warranty

 

This warranty gives you specific legal rights. You may have other rights that vary from state to 
state. 

Warranty term

 

Limited 2-year warranty applies to a    l   l      tent  components  including base, aluminum poles, ladder, 
fabric and seams.

 

 
 

Overland Vehicle Systems 

9115 Dice Road 

 Unit 14 

Santa Fe Springs, CA 90670 

833.226.4863

 

 

 
 

Summary of Contents for Nomadic















Reviews: