Getting Started
This installation manual supports all current Overland Vehicle Systems tents. The installation
process varies only slightly between certain models and is explained in detail within these
pages.
1.
Remove tent from box and place on a
clean surface (a sturdy table is a good
option). Undo all the Velcro straps so
that you can open the tent enough to
unzip the door and remove the
contents.
2.
Locate the four mounting holes under
the tent floor and lay the tent with
this side facing upwards.
See
illustration for hole locations.
3.
Release all the Velcro securing straps and
open the tent enough to access all the
items stored inside the tent. Remove all
these items and place on a table or safe
clean space.