Attachment to the roof rack
•
It is the responsibility of the installer to ensure the roof rack has an adequate load rating to
support the Nomadic roof top tent. The Nomadic tent weigh approximately
o
Nomadic 2: 150lbs
o
Nomadic 3: 161lbs
o
Nomadic 4: 172lbs
•
Although 2 people can possibly lift the tent onto the vehicle, we recommend that four
people be used due to the weight and size of the tent. This is to prevent injury or damage to
the vehicle
•
If mounting the tent to the rear opening, make sure that the tailgate operation does not
interfere with the tent
•
When lifting the tent onto the roof of the vehicle, make sure that mounting bolts do not
contact the roof as this will cause damage to the vehicle. In some cases, the mounting bolts
might need to be shortened to clear the roof.
•
In some cases, the 6.5M soles will need to be drilled through roof bars to secure the tent.
The installation orientation of your Nomadic rooftop tent can be attached will depend on the type
of roof rack/roof bars fitted to the vehicle.
Place the tent on top of your vehicle rack system, ensuring the mounting tracks are
perpendicular to the bars they will mount to, and the tent is centered on the roof rack.
Position the hinge so that the tent will open to the desired side.
1.
Slide the 13mm bolts and channel sliders
into the mounting tracks. Lift one side of
the tent to position one set of bolts and
channel sliders on the inner side of the
roof rack bar and an additional set on
the opposite side. Repeat on all four
corners.