GEBRAUCHSWEISE
ACHTUNG
Vom Gebrauch stellen Sie das Gerät auf eine feste, ebene, horizontale
Fläche, mindestens ein Meter vom Wand oder Möbeln. Vergewissern Sie
sich, dass Luftauslass und Lufteingang nicht gesperrt wurden.
1.
Schließen Sie den Luftreiniger an Strom an.
2.
Drücken Sie den Schalter, um das Gerät einzuschalten.
3.
Drücken Sie eine Taste für Geschwindigkeit des Ventilators, um seine
Geschwindigkeit im Umfang 1-5 einzustellen. Eine Standardeinstellung
ist 5. Halten Sie die Taste, um die Klänge des Panels auszuschalten.
4.
Drücken Sie den Schalter für UV-C Lampe, um sie einzuschalten.
Nach dem Austausch der Glühbirne halten Sie die Taste, um den Aus-
tausch-Sensor wieder zu betätigen.
5.
Dank der Zeitschaltuhr kann die Zeit von 1 bis zu 8 Stunden eingestellt
werden, nach dieser Zeit wird das Gerät ausgeschaltet. Nach dem
Austausch des HEPA-Filters halten Sie die Taste der Zeitschaltuhr, um
den Austusch-Sensor wieder zu betätigen.
AUSTAUSCH VOM FILTER
Das Gerät wird ein akustisches Warnsignal hervorgebracht und auf dem
Anzeigepanel wird eine Kontrolllampe leuchten, die über Notwendig-
keit des Austausches vom Filter informiert. Wenn das HEPa-Filter die Far-
be von weiß auf grau oder schwarz ändert, soll es getauscht werden.
1.
Schalten Sie das Gerät aus und trennen Sie es vom Strom.
2.
Nehmen Sie das Gehäuse des Filters und drücken die Verriegelungstaste
3.
Nehmen Sie das Filter heraus
4.
Stecken Sie das neue Filter und setzen Sie das Gehäuse ein.